Boiler repair & HVAC in Ozone Park, Queens

We serve Ozone Park from our Ridgewood shop, about 22 min away. Plumbing, HVAC, boiler repair, heating, drains and gas piping. Emergency calls answered 24/7.

Ozone Park filled in between the 1890s and the 1930s with the dominant housing type that defines the neighborhood today: two-story attached brick rowhouses and semi-detached two-family homes built by small developers for working-class families who arrived in successive waves. Most of the housing stock dates to the 1910s and 1920s, meaning galvanized supply lines, cast-iron DWV, and one-pipe steam heat with cast-iron radiators are standard in buildings that haven't been repiped or converted to gas hot-water heat. The owner-occupied two-family model — rental unit below, owner above — has kept much of Ozone Park's housing occupied and maintained but often un-renovated, so original plumbing systems survive at a higher rate here than in neighborhoods with higher turnover.

Our Ozone Park rowhouse has galvanized supply from the 1920s — at what point does it become a health concern?

Galvanized steel supply pipes corrode internally and can release rust and scale into the water as the pipe deteriorates. Visual signs include brown or rusty-colored water, especially at first draw after the tap has been off overnight. At 80-plus years, Ozone Park's original galvanized supply is well past its service life and should be replaced for both performance and water quality reasons. The city's lead service line replacement program addresses the street connection, but branch lines inside the home are the owner's responsibility.

We're on the top floor of our Ozone Park two-family and the water pressure has always been low — can that be fixed?

Yes. Low pressure specifically on upper floors in a pre-war Ozone Park two-family almost always means the galvanized supply risers have narrowed internally from mineral deposits over 80-100 years. The fix is repiping those risers with copper or PEX. We can test the pressure at the main shutoff and at the upper-floor fixtures to confirm — if there's a significant pressure drop between the two, the pipes are the problem and a repipe will resolve it.